您好,欢迎访问优校网! 收藏本页 手机访问
今天是:

peak strength是什么意思


中文翻译抗剪强度峰值强度

网络释义

1)peak strength,抗剪强度峰值强度2)peak shear strength,峰值抗剪强度3)peak shear strength,峰值剪切强度4)least square law,抗剪强度取值5)peak intensity,峰值强度6)peak strength,峰值强度

用法例句

    At present,very little test data is available about the peak shear strength between the grout and the bore wall in the interior bond section of prestressed anchorage cable.

    关于锚索内锚固段注浆体与孔壁之间的峰值抗剪强度,目前很少有试验资料可供采用。

    relation between normal stress and peak shear strength, relation between normal stress and residual shear strength, and relation between normal stress and frictional shear strength), the shear deformation properties of two kinds of cement concretes, the characteristics and description of shear faces.

    介绍了丹江口大坝后期加高现场原位抗剪试验研究成果,内容包括:法向应力与峰值抗剪强度的关系;法向应力与残余抗剪强度的关系;法向应力与摩擦抗剪强度的关系;两种水泥混凝土剪切变形特性;剪切面特征及描述。

    Based on the experimental results,it can be found that the peak shear strength decreases with the increase of shear deformation velocity;and that the decreasin.

    试验结果发现:(1)岩石节理面的峰值剪切强度随着剪切速率的增大而减小,减小幅度随着剪切速率的增大变小;(2)岩石节理面的峰值剪切强度随着起伏角度的增大而增大;(3)岩石节理面的峰值剪切强度随着法向应力的增大而增大,基本成线性关系。

    To use the least square law to gain the proportion shearing strength,yield shearing strength and peak value shearing strength and the mechanical parameter c and φ of shearing strength that anti-analysis yielded carry on comp.

    文章主要针对软弱夹层抗剪强度取值所存在的争议,通过对贵州新街子滑坡的软弱夹层分别选择比例极限、屈服极限及峰值作为剪应力值,采用最小二乘法获得比例抗剪强度、屈服抗剪强度和峰值抗剪强度。

    Purpose: In order to assess the angiogenesis of hepatocellular carcinoma, the peak intensity in contrast ultrasonography of the lesions was compared with the findings of immunohistochemistry.

    目的:探讨肝细胞肝癌超声造影峰值强度与血管生成的相关性。

    Objective: To study the peak intensity in contrast ultrasonography of hepatocellular carcinoma and its relationship with angiogenesis and to provide a wound-less index for angiogenesis evaluation in clinic.

    目的:探讨肝细胞肝癌超声造影峰值强度与血管生成的相关性,以期为临床提供无创性血管生成的评估指标。

    By numerical analysis method,influences of beam separation distance,characteristics of unit beam and array structure on far field peak intensity and beam quality of incoherent combination and the same phase coherent combination were researched.

    建立了矩形阵列高斯光束合成模型,采用数值模拟方法计算了光束间距、单元光束特性以及阵列结构等参数对非相干合成和同相位相干合成的远场峰值强度及光束质量的影响,描述了非同相位相干合成可能产生的结果,讨论了同轴与非同轴合成,相干与非相干合成的特点。

    Research results:Residual strength of slip soil has linear regression with peak strength;plastic index can be better used to estimate residual strength.

    研究结果:滑带土的峰值强度和残余强度比较接近,成线性关系;塑性指数能较好的用来估算残余强度。

    A modified Ashby-Hallam model was used to calculate the peak strength of granite specimens containing flaws.

    在分析Ashby和Hallam含缺陷脆性介质峰值强度理论模型基础上,对其进行修正,并用修正的理论模型研究单轴作用下,含裂纹缺陷花岗岩试样的裂纹萌生、扩展、贯通和相互作用等因素对峰值强度的影响规律。

    Joint was treated as quadrate elements of ideal plastic material beyond peak strength.

    采用FLAC模拟了节理倾角对各向异性岩样峰值强度、力学行为及剪切带图案的影响。

    TESTING STUDY ON THE PEAK SHEAR STRENGTH BETWEEN GROUT AND BORE WALL IN THE INTERIOR BOND SECTION OF PRESTRESSED ANCHORAGE CABLE

    锚索内锚固段注浆体与孔壁之间峰值抗剪强度试验研究

    An Approach to Relation of Graded Macadam CBR Value to Strength of Shear Resistance

    级配碎石CBR值与抗剪强度关系探讨

    JRC-JCS Model and Its Application on Studying Shear Strength of Rock Joint;

    JRC-JCS模型在抗剪强度参数取值中的应用

    Determination of shear strength parameters for stability check of Dayantang landslide

    大岩淌滑坡稳定复核抗剪强度参数的取值研究

    Back-Analysis on Shear Strength Parameters c & (?) with Application to Foundation Pit in Xinjiang;

    新疆基坑工程中抗剪强度参数c、(?)的取值反演及应用研究

    Study on application of earthquake-resistant and shear-resistant strength theory of stone structure

    石砌体结构抗震抗剪强度理论的应用

    Experimental Study on Shear Strengthening of RC Beams with CFRP Sheets;

    CFRP加强混凝土梁抗剪强度的试验研究

    Shear Strength Behavior of Over-consolidation Clay in Ring Shear Tests;

    利用环剪仪对超固结黏土抗剪强度特性的研究

    Shear strength behavior of overconsolidated clay in ring shear tests

    采用环剪仪对超固结黏土抗剪强度特性的研究

    Research on influences of particle breakage and dilatancy on shear strength of calcareous sands

    颗粒破碎及剪胀对钙质砂抗剪强度影响研究

    NUMERICAL SIMULATION OF FAILURE PROCESS OF THREE-POINT BENDING CONCRETE BEAM CONSIDERING HETEROGENEITY OF TENSILE STRENGTH AND POST-PEAK SOFTENING CURVE

    考虑抗拉强度及峰值后软化曲线非均质性的混凝土梁三点弯破坏过程数值模拟

    Ebonite--Method of test for shearing strength

    GB/T1700-1982硬质橡胶抗剪切强度试验方法

    Method of testing in shearing stength parallel to grain of wood

    GB/T1937-1991木材顺纹抗剪强度试验方法

    The investigation of shear strength of partly consolidated clay

    未完全固结软粘土抗剪强度试验研究

    The General Shear Strength and Slip Surface Position of Geotechnical Space

    岩土空间面上抗剪强度与滑动面位置

    Shear strength of Baise r emolded expansive soil

    百色重塑膨胀土抗剪强度的试验研究

    Programming solver tools of Excel evaluate shear strength parameters from results of triaxial tests

    Excel规划求解三轴试验抗剪强度指标

    Shear strength and fracture surface analysis of BiAgNiCuGe/Cujoint

    BiAgNiCuGe/Cu接头抗剪强度与断口分析