Analysis and Calculation of Reinforced Concrete Shrinkage;
钢筋混凝土的收缩变形分析及计算
The cause for volumetric shrinkage and warpage was ana- lyzed.
以某厂生产的精密塑件——电子接插件为例,通过分析该塑件体收缩变形和翘曲变形的原因,以正交试验为设计准则,利用 Moldflow 软件对各种工艺参数组合进行注射成型过程的模拟。
In order to study the early-age cracking tendency of high strength concrete under circumfer-entially restrained condition, the non-contact shrinkage measuring device was developed to determine the free shrinkage of high strength concrete with water to cement ratio of 0.
为研究环向约束条件下高强混凝土早期开裂趋势,在单面干燥条件下应用非接触式混凝土收缩变形测定仪测试了水灰比为0。
Compression Deformation Behavior of Semi-solid Y112 Aluminum Alloy;
半固态Y112铝合金的压缩变形力学行为
Mechanical properties of A2017 alloys compression deformation in semi-solid state;
A2017合金半固态压缩变形力学特性
Compression Deformation Behavior of Semi-solid Al-Si Alloy Prepared by Crystallization-controlling;
控制结晶法制备半固态铝合金的压缩变形特性
Study on the heating treatment methods for compressive deformation of poplar in a fixed man-made plantation;
不同热处理方法固定人工林杨木压缩变形的研究
Effect of compressive deformation on microstructures and properties of infiltrated W - Cu composites;
压缩变形对钨渗铜合金微观组织及性能的影响
Study on compressive deformation of porous aluminum alloy with high specific strength;
高比强多孔铝合金的压缩变形性能
Taking the winding heads CW6 by Barmag Germany,analysis is done to the factors causing the craping deforming of bobbins FDY in process of varieties of long fiber production.
以德国巴格(Barmag)公司制造的CW6型卷绕头为例,分析了在化纤长丝生产中FDY筒管产生皱缩变形的原因,认为主要原因是卷绕张力过大。
bishrinkage yarn
双收缩变形丝《化纤》
Longitudinal contraction deformation:The component contracts in the weld direction after weiding.
纵向收缩变形:构件焊后在焊缝方向上发生的收缩。
Transverse/cross/lateral contraction deformation:The component contracts in the upright direction of weld after weiding.
横向收缩变形:构件焊后在垂直焊缝方向上发生的收缩。
Factors Affecting Shrinkage of Self-Compacting Concrete at Early Age and Control;
自密实混凝土收缩变形的影响因素与控制
Experimental Study on Dry Shrinkage Deformation of Autoclaved Flyash-Lime Brick Masonry
蒸压粉煤灰砖墙体收缩变形性能试验研究
Welding Shrinkage Deformation and Residual Stress of Duplex Stainless Steel 2205
2205双相不锈钢焊接收缩变形与残余应力研究
STUDY ON THE SHRINKAGE DEFORMATION OF THIN COMPOSITE LAMINATES DURING CURING PROCESS
复合材料薄板的成型固化收缩变形研究
SHRINKAGE DISTRIBUTION OF CONCRETE WITH ONE SURFACE EXPOSED TO DRY CONDITION
单面干燥条件下混凝土的收缩变形分布特征
Highway and Railway Engineering Constringency Transmogrification Testing Study of Pavement Material and Thermal-force Coupled Analysis of Pavement Structure;
路面材料收缩变形试验研究及路面结构热—力耦合分析
The Shear Lag Effection and Concrete Deformation Research on Construction Stage on Wide Box Girder- Continuous Rigid Frame Bridge
宽箱梁连续刚构桥施工阶段剪力滞效应及混凝土收缩变形研究
contracted channe
收敛形管道, 收缩形流道
Analysis on creep strain for ready-mixed concrete during shrinkage
商品混凝土收缩过程中的徐变变形分析
Analysis on the Contraction and Time Deformation of Long-spanned PC Cable-stayed Bridges
大跨度PC斜拉桥收缩和徐变变形分析的研究
Curing Shrinkage and Warpage Deformation of Composite Thin Laminates at Room Temperature
复合材料薄层板常温固化收缩及翘曲变形
The Structure and Properties of Differential Shrinkage Multi-filament Air-jet Texturized Yarn;
异收缩丝空气变形(多重变形)加工成纱结构与性能
That gradually would reduce the orbit from an elongated ellipse to smaller, progressively more circular shapes.
这麽做会逐渐将轨道从扁长椭圆形收缩成较小且逐渐变圆的形状。
Freyssinet flat jacks may be required to compensate for distortions arising from creep and shrinkage.
弗涅新奈氏扁千斤顶可用以调整收缩与徐变产生的变形。
Study of strain rate imaging in evaluating the postsystolie shortening in ischemic myocardium
应变率成像评价缺血心肌收缩后收缩
本网站所收集内容来自网友分享仅供参考,实际请以各学校实际公布信息为主!内容侵权及错误投诉:1553292129@qq.com
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号