Using the simulation hot forging of two type lubricant spray model test in actual production conditions, the heat transfer conefficient and the lubricant adhesion were estinated.
用模拟热锻现实生产条件下的两种润滑剂喷射模型试验可以估计传热系数和润滑剂黏附力,最新设计的热减径挤压试验能显示润滑剂条件和摩擦系数的关系及摩擦因素和模具温度的关系,该结果可以在预测模具磨损寿命的CAE系统中实现。
In the paper, by rigid-plasticity finite element software Deform-3D, the hot forging process of the crankshaft is analyzed under different technologic conditions.
基于刚塑性有限元软件Deform-3D,对曲轴在不同工艺条件下的热锻过程进行了对比分析。
Based on the rigid-plastic finite element theory and the viscoplastic model considering dynamic recrystallization, a finite element method is developed to simulate the deformation, temperature variation and microstructure evolution during hot forging.
在热锻过程中,由动态再结晶引起的微观组织演化是决定锻件最终性能的重要因素之一。
On the base of discussing the mechanism and techniques of hot-forging and encapsulating NaI(Tl) crystal,the techniques of hot-forging and encapsulating large-size NaI(Tl) crystal are studied in detail,and good results are obtained.
本文在讨论了NaI(Tl)晶体热锻及封装机理和工艺的基础上 ,对大尺寸NaI(Tl)晶体的热锻及封装的工艺作了详细地研究 ,并成功地制备了各项性能指标优良的大尺寸NaI(Tl)晶体闪烁探测器。
The results reveal that the copper sheets are manufactured by using the technology of hot-forging,and temperature range of hot-forging is 500~700℃.
结果表明,铜片为高温热锻成形,其热锻温度范围在500-700℃之间,符合现代金属学原理。
Research on the stress and strain evolution of aluminum alloy hot forging die;
铝合金热锻模具结构中的应力应变演变过程分析
Simulation analysis on effects of variable physical property parameters of hot forging die materials on die stress;
热锻模材料变物性参数对模具应力影响的模拟分析
Study on improving the hot forging dies service life of 5CrMnMo Steel of boronitriding;
硼氮共渗提高5CrMnMo钢热锻模使用寿命的研究
本网站所收集内容来自网友分享仅供参考,实际请以各学校实际公布信息为主!内容侵权及错误投诉:1553292129@qq.com
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号