casting process是什么意思

网络释义

用法例句

Application of CAE to Design of Casting Process for Piston;

CAE技术在活塞铸造工艺设计中的应用

Improving on casting process with computer simulatoin of ZG1Cr18Ni9 valve body;

利用计算机模拟对ZG1Cr18Ni9阀体铸造工艺的攻关

The Production and Casting Process of Nodular Iron Casting Body;

球墨铸铁件机体铸造工艺研究与生产实践

Design and Realization of a Casting Technology CAD System by Further Development on Pro/E;

基于Pro/E的三维铸造工艺CAD系统的设计与实现

Casting technology of cylinder sleeves for large marine diesel engines;

大型船用柴油机缸套的铸造工艺

Casting Technology for Screwy Sheath of Double Screw Roller Grinded-paste Machine;

双螺旋辊式磨浆机螺旋套铸造工艺的研究

The design for foundry technology about QC4110 diesel engine bent-axis;

QC4110柴油机曲轴铸造工艺的设计

Study on a CAD/CAE System for Foundry Technology under Concurrent Engineering Environment;

并行工程环境下的铸造工艺CAD/CAE系统

Research and Development of Computer Aided Software for Foundry Technology Design

计算机辅助铸造工艺设计软件研制

An introduction was made to the foundry method of CY4D series diesel engine cylinder block and head,as well as the quality problems met during the trial production and their prevention measures including: leakage of cylinder head; dimensional deviation of block after machining and cylinder cores cracking.

介绍CY4D系列柴油机缸体的铸造工艺特点,试制过程中出现的包括缸盖渗漏、缸体加工尺寸偏差和缸体缸孔穿芯等质量问题,以及相应的解决措施。

The foundry method design of a nodular iron reductor housing with ferrite matrix was de-scribed.

介绍了铁素体基体球铁减速器壳体的铸造工艺设计。

The foundry method scheme, gating system design, melting and treatment of the molten iron was described.

对铸件的工艺难点进行了分析,介绍铸造工艺方案,浇注系统设计,和铁 液熔炼、处理工艺。

The Optimal Casting Technique Design of Water Turbine Runners;

转轮体铸造工艺的优化设计

Therefore computer aided design for structure and casting technique of supporting trunnion roller is realized.

针对传统回转窑托轮铸造工艺复杂、受力易产生轮辐开裂等状况,应用ABAQUS对其应力分布进行了分析,改进了托轮的结构。

Through the improvement on casting process, the horizontal tilting metal mould casting technique has been adopted to produce Al alloy pressure-tight shells.

从铸造工艺、工装设计上进行改进创新,采用横向翻转浇注工艺铸造耐压外壳铸件。

Based on the casting method,the material of the jacket core was changed,the venting system of the mold and the iron melting process was improved.

分析了HT250缸盖气孔形成的原因,认为气孔是由于水套芯发气量大,砂型透气性差、排气孔少,铁液温度低、流动性不足,充型不平稳等因素造成;根据铸造工艺,采取了更换水套芯材料、改进砂型排气系统及铁液熔炼工艺等措施,使气孔废品明显减少,有效提高了铸件合格率。

In order to increase the productivity of the gray and vermicular iron flywheel castings,the original casting method with one layer of two castings per mould was changed into the method with two layers of 4 castings(8 casings for small flywheels) per mould.

为提高灰铁和蠕铁飞轮的生产率,将原铸造工艺每型2件、单层布置改为每型4件(小飞轮每型8件)双层布置。

Based on the configuration characteristics of the large nodular iron case casting,the casting method,gating system and relevant process parameters was selected.

解决了大型箱体铸件内孔同轴度不一致的问题,并通过采用CAE模拟软件分析铸件的缺陷,完善其铸造工艺、降低产品的开发风险。

One Special Casting Method in Jewelry Making,Cuttlefish Casting

一种特别的首饰铸造工艺——墨鱼骨铸造

The Casting Technology of 1400s18 Pump Impeller;

1400s18大泵叶轮的铸造工艺

CAD System for Cylindric Magnesium Alloy Casting by Low Pressure Casting Process;

圆筒型镁合金铸件低压铸造工艺CAD

The Experimentation Study of the Low-pressure Foundry Techniques of the Hull Castings;

壳体类铸件的低压铸造工艺试验研究

Cast Technology of Cast-steel Shell Based on ProCAST

基于ProCAST的铸钢件壳体铸造工艺研究

Casting method and Equipment Used for Resin Sand-Coated Permanent Mould Cast Wheel Hub Castings

轮毂类铸件覆砂铁型铸造工艺及设备

Improvement on Casting Process for Frame Casting of Magnesium Alloys

某型框架体镁合金铸件铸造工艺改进

Research on Cast Technology of the Self-made Investment for Titanium and on Accuracy of the Dental Titanium Castings

自制铸钛包埋材料铸造工艺与铸钛修复体铸造精度的研究

Development of CAD System on Camshaft Mold and Foundry Tools Design;

凸轮轴铸件铸造工艺工装CAD系统的开发

Casting Production Process of a Ductile Iron Coupler Used for Heavy Trailer

重型拖车球铁连接器铸造工艺重型拖车球铁连接器铸造工艺

Plane Casting Technology for High Chromium Cast/Carbon Steel Composite Plate

高铬铸铁-碳钢复合板水平浇注铸造工艺

Process Parameters Design of Semisolid Squeeze Casting for Producing White Cast Iron Milling Ball

白口铸铁磨球半固态挤压铸造工艺参数设计

Research on Casting Process and Properties of Ductile Iron Castings Produced by Copper-based Alloy Mold;

球墨铸铁铜金属型铸造工艺和性能的研究

Solidification Mechanism for Modified Cast Iron and Non-riser Casting Technology;

孕育铸铁件凝固机理及无冒口铸造工艺

Study of Structure Properties and Process Optimization of Chilled Iron Camshaft

激冷铸铁凸轮轴组织性能研究及铸造工艺优化

CAE Optimal Design of Casting Process of Steel Casting for Welded-structure Part

焊接结构用铸钢件的铸造工艺CAE优化设计

Application of Z-Cast Software on Casting Process Optimization of Hub

Z-Cast软件在轮毂铸钢件铸造工艺改进上的应用

Casting Technique of Large-Scale Aluminum Gearbox Block Used for High-Speed Train

高速列车用大型铸铝齿轮箱箱体铸造工艺