flash heat是什么意思

网络释义

用法例句

Effects of heating rate and particle size on degradation of polyethylene in supercritical water;

加热速率和粒径对聚乙烯在超临界水中转化的影响

Design and verification of a wire-mesh reactor with variable heating rate;

可变加热速率线网反应器设计及验证

The experimental results indicated that the heating rate of the soybean sauce increased with increase of the voltage and the salt content and decrease of solid content.

研究了不同欧姆加热条件对大豆酱电导率、加热速率以及酵母菌杀菌效果的影响。

For a kind of low carbon micro-alloyed steel,a thermal simulation test was conducted with samples of F+B+P microstructure and the effects of its cold deformation at room temperature on the distribution,size and composition of precipitates were investigated via a technological process for rapid heating and short holding time.

实验用试样的原始组织为铁素体、珠光体加少量贝氏体,采用一种快速加热短时保温的工艺方法探讨室温变形的作用。

During the rapid heating for limestone calcination,a new platinum-membrane reactor(PMR),which accurately weighs the sample and acquires temperature of particles,was used.

在加热过程中,应用一种新型的快速加热装置——铂膜反应器,及时准确地获得样品质量和颗粒温度,来研究石灰石的煅烧分解,并对石灰石加热速率高达750℃/s下的分解反应特性,及其对分解后产生的氧化钙吸收CO2和脱硫的化学反应特性进行了研究。

Based on studying the phase diagram of the Ti-Al binary system, the microstructure types and continuous cooling transformations of the TiAl-based alloys, and the heat treatment practices and effects, a new rapid heating cyclic heat treatment technology with the characteristics of rapid heating, holding in single α phase region, short holding time and relatively slow cooling was proposed.

在研究Ti Al二元相图及合金元素的影响、TiAl基合金显微组织类型与连续冷却转变、热处理实践及效果的基础上 ,提出了快速加热循环热处理新工艺 ,该工艺的特点是 :加热速度快 ,单相区保温 ,保温时间短 ,冷却速度相对较慢。

The continuous-heating aging kinetics of the Cu-Cr-Zr alloy was studied by measuring the resistivity ratio of the alloy in the continuous-heating process.

通过测试Cu-Cr-Zr合金在等速加热过程中电阻率的变化,对该合金等速加热时效动力学进行了研究。

Effect of heating rate on the reverse martensitic transformation in a Cu-Zn-Al-Mn quenched alloy;

加热速度对Cu－Zn－Al－Mn淬火态合金马氏体逆相变的影响

The temperature of the beginning crystallization is proportional to the cube root of the heating rate.

研究结果表明:晶化转变温度点与加热速度的立方根成正比,随着加热速度的增加,终了温度与晶化开始温度之差越大,晶化发生的温度区间越宽。

It is found that the time for phase transformation is greatly influenced by the heating rate.

将试验测定的 Ni Ti合金热容值用于计算不同电流值加热 (不同的加热速度 )的 Ni Ti合金丝温度的变化历程 。

Heating Rate and Temperature Distributing on Continuous Ohmic Heating for Liquid Food

液态食品连续通电加热的加热速率与温度分布

Effect of retrogression heating rate on the microstructure and corrosion resistance of aluminum alloy 7050

回归加热速率对7050铝合金组织及抗腐蚀性能的影响

By precisely controlling the rates of cooling and heating, ice crystal morphology can be intimately controlled and investigated.

通过合适的制冷和加热速率的控制，研究人员可以密切观察和控制冰晶体的形态。

Fast heating, high precision of tempt control and high thermal efficiency.

加热速度快，控温精度高，热效率高。

And comparing with radiation heating, atom diffusion velocity at interface quickened.

与辐射加热相比，接触面处原子扩散速率加快。

Once tube wall is overheated, oxidation corrosion rate is not only accelerated, hut also the tube performance is rapidly deteriorated.

一旦管壁过热不仅加速氧化腐蚀速率，且急剧恶化管材性能。

The results also show that the pressure drop of the two kinds of heat sinks is little influenced by power input under the low approaching velocity.

在低风速下,加热功率对这两种散热器压降的影响也不大。

Heating makes the molecules of a material move faster, increasing the rate of evaporation.

加热使物质的分子运动得更快，结果就加大了蒸发的速率。

The rate of heat flow between any two points increases with difference of temperature.

任何两点间的热流动速率则随温差的加大而增加。

Influence of Reentry Velocity and Reentry Angle on Peak Aerodynamic Heating Rate of Manned Spacecraf

飞船再入速度和再入角对气动加热率峰值的影响

The rate of change of velocity with respect to time.

加速度速度相对于时间变化的速率

rapid TG-DTA unit

快速加热差示热分析仪/热天平

The heat accelerated the corruption of the dead body.

天热加速了死尸的腐烂。

dynamic hardening

快速加热冷却淬火法

fixed frequency cyclotron

固定频率回旋加速器

high natural frequency accelerograph

高固有频率自记加速计

The efflux rate increases greatly.

流出速率大为增加。

cyclotron-frequency magnetron

回旋加速频率磁控管