Vibration of lapping machine is an important influencing factor on the lapping quality of diamond cutting tools in mechanical lapping, especially in the precision lapping process.
研磨机床的振动是影响金刚石刀具机械研磨质量的重要因素,尤其在精密研磨工序。
The critical condition for plastic deformation of lapped surface layer in mechanical lapping single crystal diamond is analyzed in theory firstly.
为研究单晶金刚石晶体机械研磨过程中表层材料的去除机理,首先从理论上分析了单晶金刚石晶体在机械研磨过程中表层材料发生塑性变形的临界条件,并利用原子力显微镜对研磨后的(110)晶面和(100)晶面进行观测,发现两个晶面沿易磨方向<100>和难磨方向<110>研磨时的研磨表面都存在塑性变形后的纳米沟槽,表明表层材料实现了塑性方式去除。
In the paper, mechanical lapping was used for lapping thick CVD diamond and the lapping rate was 6.
本文采用了机械研磨法来研磨CVD金刚石厚膜,研磨速率达6。
Effect of mechanical grinding on thermal behavior of kaolinite in coal-bearing strata,Pinglu County;
机械研磨对平鲁煤系高岭石热行为的影响
The increasing of thermal activities of fly ash treated by mechanical grinding largely attributes to the thermal results of grinding.
研究了粉煤灰经过机械研磨后的热学性质的变化。
The changes of silicate tetrahedron of fly ash in the process of mechanical grinding were analyzed by trimetheylsilicane(TMS).
采用三甲基硅烷化分析技术 (TMS) ,研究了粉煤灰机械研磨过程中硅氧四面体结构的变化趋势 。
Study on the mechanical milling for the mixtures of SmCo_5 and FeCo ribbons;
SmCo_5和FeCo两种快淬薄带混合物机械研磨的研究
Studies on Halogenation, Amidation, and Cyclization Reactions under Mechanical Milling Conditions
机械研磨条件下卤化、酰胺化和环加成反应的研究
Phase transformation in annealed mechanical alloying Nd--11Fe-Ti alloy and annealed mechanical milling NdFe11Ti compound is investigated by using X--ray diffraction, ac initial susceptibility measurement and differential thermometric analysis.
采用 X射线衍射、初始交流磁性率和差热分析研究了机械合金化 Nd-11Fe-Ti(原子比)合金粉和机械研磨 NdFe_11Ti比台物粉在退火过程中的相转变。
Effect of mechanical attrition on microstructure and property of electroless plating Ni-P coatings on magnesium alloy;
机械研磨对镁合金化学镀Ni-P镀层结构及性能的影响
The mechanical attrition(MA)was supplied in a traditional electroplating process by the vertical movement of glass balls on the sample surface with a special vibrating frequency.
在Watt镀液中加入玻璃球,玻璃球以不同频率垂直撞击试样表面形成机械研磨,考察了震荡频率和球直径对镍镀层晶粒细化的影响以及机械研磨对晶粒生长的影响,SEM表面观察表明,机械研磨改变了镀层晶粒的生长方式,使镀层晶粒明显细化,镀层表面光滑,在电沉积过程中施加机械研磨,玻璃球的撞击会在镀层表面产生宏观和微观缺陷,增加形核中心,提高形核速率;玻璃球撞击晶粒尖端,使得镀层表面变得平整,有利于电力线均匀分布,促进形核,避免了晶粒不均匀长大。
The preparation methods for inorganic-organic composite particle such as mechanical mill method,heterogeneous coagulation method,phase separation method and monomer polymerization method are mainly introduced.
主要介绍无机-有机复合粒子制备方法——机械研磨法、异相凝集法、相分离法和单体聚合法。
Study on Mechanical-Chemistry and Physical Properties of Mechanically Ground Fly Ash;
粉煤灰机械研磨中物理与机械力化学现象的研究
Microstructure and Properties of Surface Nanocrystallized CP-Ti Processed by SMAT;
机械研磨工业纯钛表面纳米化与组织性能研究
Mechanism of Surface Nanocrystallization of Titanium during Surface Mechanical Attrition
表面机械研磨工业纯钛表面纳米化研究
Investigation of Alloying Method of Pure Iron Subjected to Surface Mechanical Attrition Treatment
纯铁表面机械研磨Fe-Ni合金化方法的研究
Effect of vibration-mechanical-attrition and thermal-diffusion on sprayed Al coating on AZ31 magnesium alloy
AZ31镁合金铝涂层机械研磨振动热扩散研究
8 Inch Copper Chemical Mechanical Polish Process vs Wafer Corrosion Defect Reduction Method;
八英寸铜化学机械研磨工艺对硅片腐蚀的改善
To transform or process mechanically in a mill.
磨出,以机械加工通过研磨机而整形或制造
mechanical food mill weighing 10kg or less
食品研磨机,机械的,重10kg或10kg以下
coffee-mill, mechanical, weighing 10kg or less
机械咖啡研磨器,重10kg或10kg以下
STUDY OF MECHANICAL FORCE CHEMISTRY FOR CaCO_3/SiO_2 GRINDING
CaCO_3/SiO_2粉磨机械力化学研究
The most common finishing operations are mechanical, such as milling, grinding, or polishing with abrasives.
最普通的精加工工序是用机械的方法,如研磨,磨削或用磨料抛光。
A device or mechanism that grinds grain.
磨臼,磨粉机磨谷物的装置或机械
Research of ultrasonic and mechanical milling technology used in spool structure
超声/机械复合研磨球阀阀芯机构设计研究
Design of relining manipulators in MLH2000 7-DOF mill
MLH2000型七自由度磨机换衬板机械手的研制
Mechano-chemical effects of α-Fe_2O_3 powder in super-fine ground by ball-stirring mill in wet
湿法超细研磨中α-氧化铁机械力化学效应研究
mechanical grinding wheel forming equipment
机械式磨轮成形设备
Woody paper: Synonymous with "mechanical paper".
磨木纸:即机械木浆纸.
The Studies of the Hydrogen Storage Properties of Mg-based Alloys after Modification by Mechanical Grinding with/without Tetrahydrofuran (THF);
Mg基储氢合金的机械球磨及四氢呋喃球磨改性研究
本网站所收集内容来自网友分享仅供参考,实际请以各学校实际公布信息为主!内容侵权及错误投诉:1553292129@qq.com
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号