touch fracture是什么意思

网络释义

用法例句

Research on fracture toughness of 2124 aluminum alloy;

2124铝合金超厚板断裂韧性的研究

Effects of heating temperature on the fracture toughness of macroporous alumina supports added Al powder;

热处理温度对金属Al增韧氧化铝多孔陶瓷支撑体断裂韧性的影响

Microstructure and fracture toughness of directionally solidified Al_2O_3/YAG/ZrO_2 eutectic ceramics by laser zone remelting;

激光区熔定向凝固Al_2O_3/YAG/ZrO_2共晶自生复合陶瓷的显微组织与断裂韧性

CTOD fracture toughness of welded joint of TCS stainless steel;

TCS不锈钢焊接接头CTOD断裂韧度试验研究

Microstructure and fracture toughness of joint under different welding conditions;

不同焊接条件下接头组织和断裂韧度的对比分析

Numerical simulation and study on fracture toughness of submarine pipeline;

海底管线用钢低温断裂韧度的试验研究和数值模拟

Analysis of tendency of ductile fracture at corner of workpiece during grooveless rolling;

无槽轧制轧件角部的韧性断裂趋势分析

Research on ductile fracture criteria and the application in cold heading process;

韧性断裂准则的研究及其在冷镦成形过程中的应用

Parameter for ductile fracture of single notches on the basis of meso-mechanics and its applications;

单面缺口的韧性断裂参量及其应用

Furthermore,it also gives some summary about the integrity management,HTP rolling procedure,ductile fracture arrest of high grade steel,strain-based design,and development of high deformability steel.

针对完整性管理、高温轧制工艺(HTP)、高钢级管线钢的韧性止裂、基于应变的设计以及抗大变形钢的开发等做了概括性论述。

AN APPROCH TO THE RELATIONSHIP BETWEEN THE FRACTURE TOUGHNESS OF NOTCH AND THE FRACTURE TOUGHNESS OF CRACK

切口断裂韧性与裂纹断裂韧性之间关系的探讨

FRACTURE TOUGHNESS MEASUREMENT OF ROCK WITH FRACTAL CRACKS USING HYDRAULIC FRACTURING

水力致裂法测定分形裂纹下岩石的断裂韧性

Impact of Tempering Temperature on Fracture Toughness of High Tenacious Steel(GDL-1)

回火温度对GDL-1高强韧新材料断裂韧性的影响

Method for Determining Elasto-plastic Fracture Toughness of Lce

冰的弹塑性断裂韧性测定方法的研究

Their fracture toughness and hardness were determined with Vicker's indentation test machine.

在维氏硬度仪上测试断裂韧性和硬度。

Characterization and Measurement of Metals Dynamic Fracture Toughness;

金属材料动态断裂韧性的表征与测试

Research on Improving Fracture Toughness of Corrosion Resistanced Ultrahigh-Strength Steel;

提高耐蚀超高强度钢断裂韧性的研究

Study of Fracture Toughness of 7A04(LC4) Ultra-High Strength Aluminum Alloys;

7A04（LC4）超高强铝合金断裂韧性研究

Investigation on the correlation between fracture toughness and impact energy for middle strength steel;

中强钢断裂韧性和冲击功关系的研究

Measuring fracture toughness J_(IC) of 50Mn frame steel by J integral;

J积分法测50Mn结构钢的断裂韧性J_(IC)

CTOD Fracture Toughness Test for Weld Seam of Q370qE of Bridge

桥梁钢Q370qE焊缝断裂韧性CTOD试验研究

Research on Fracture Toughness and Failure Assessment Curves of X80 Pipeline Steel

X80管线钢断裂韧性及失效评估图研究

Preparation and Fracture Toughness of Sm_2Zr_2O_7/SiC Composites

Sm_2Zr_2O_7/SiC复合材料及其断裂韧性的研究

Fracture Toughness of Al_2O_3-ZrO_2/W/Cr/Ni/Co Cermets

Al_2O_3-ZrO_2/W/Cr/Ni/Co金属陶瓷的断裂韧性

Research on the Determination Method of Fracture Toughness for High Strength Pipeline Steel

高钢级管线钢断裂韧性确定方法研究

The fracture of K1 c and impact specimens were observed by SEM.

通过扫描电镜观察了断裂韧性和冲击试样断口。

Analysis of the relationship between impact toughness and fracture toughness for rail steel

低温下铁道钢轨钢材冲击韧性与断裂韧性的关系分析

The fractograph exhibited typical ductile dimple fracture pattern.

断裂形式呈韧性断裂,断口以韧窝为主。